Choosing a Skylight
Skylights are available in a variety of shapes and sizes. The most common shapes include rectangular, circular, oval, diamond, triangular, multi-sided, and tubular. Before you buy skylights take some time and do a little research so you are better informed on your purchase.
Non-rectangular units usually use plastic glazing, but higher quality ones use glass. The glazing can be flat, arched, domed, pyramidal, or “warped plane” flat on the low side and concave in section on the high side. Of these, the pyramidal, arched, and domed shapes offer flexibility for positioning. Their raised design allows light to enter from more extreme angles than flat or warped plane units. This allows more positioning options.
The slope or curvature of the glazing also helps to shed moisture and leaves. These skylight designs also do not require the additional framing needed to slope a flat skylight for proper drainage on flat or low-slope roofs.
Tubular skylights are smaller than most other skylights but still have all the same skylight benefits. They consist of roof-mounted light or solar collectors, which increase their daylighting potential without the need to increase their size. Because the rooftop solar collector has a small surface area, tubular skylights minimize heat loss in the winter and heat gain in summer. Their small size also minimizes their impact on a home’s architecture.
Maximizing a skylight’s performance in your home involves three steps:
- Design: Consider your home’s design and climate in relation to the energy performance of a skylight.
- Selection: Find a skylight that meets your energy performance requirements.
- Installation: Ensure proper installation of skylights to maximize their energy efficiency.
Skylight Design Considerations
Before selecting a skylight for your home, you need to determine what type of skylight will work best and where to improve your home’s energy efficiency. We offer a Free In-Home consultations for local customers and Phone Consultations for anyone nationwide. Feel free to contact us anytime.
Skylight Energy Performance
First, it’s a good idea to understand the energy performance ratings of skylights if you don’t already. You can then determine what energy performance ratings you need for your skylight based on your climate and home’s design.
For labeling energy-efficient skylights, ENERGY STAR has established minimum energy performance rating criteria by climate. However, this criteria doesn’t account for a home’s design. Therefore, if you’re constructing a new home or doing some major remodeling, you should also take advantage of the opportunity to incorporate your skylight design and selection as an integral part of your whole-house design an approach for building an energy-efficient home.
Skylight Size and Position
The physical size of the skylight greatly affects the illumination level and temperature of the space below. As a rule of thumb, the skylight size should never be more than 5 percent of the floor area in rooms with many windows and no more than 15 percent of the room’s total floor area for spaces with few windows.
You should also consider a skylight’s position if you want to maximize day lighting and/or passive solar heating potential. Skylights on roofs that face north provide fairly constant but cool illumination. Those on east-facing roofs provide maximum light and solar heat gain in the morning. West-facing skylights provide afternoon sunlight and heat gain. South-facing skylights provide the greatest potential for desirable winter passive solar heat gain than any other location, but often allow unwanted heat gain in the summer. You can prevent unwanted solar heat gain by installing the skylight in the shade of deciduous (leaf-shedding) trees or adding a movable window covering on the inside or outside of the skylight. Some units have special glazing that can help control solar heat gain.
Choosing the right skylight can be hard, If you would like help from our Experts please call 888-783-7774 for assistance
Velux Sun Tunnel